Screw Oil Press Machine is an indispensable tool in industrial production, which not only improves the production efficiency, but also saves the labor hours greatly. Is the landmark product of entering the industrial age. The development of Screw Oil Press Machinees is closely related to the military:
The Screw Oil Press Machine transforms the power from one way to another. This process is completed through the use of closed liquids as a preface. The science of the transfer or transfer of a closed liquid is known as "hydraulics", and the word hydraulics is derived from the distant ancient Greek "Hydros" (the creator of the end of time), meaning water. The science of Hydraulics is a young science-only hundreds of years ago. It began with a name called Bryce. The principle of the hydraulic lever drive found by Pascal's transvestite. After the long river of time this principle was later called Pascal's Law. Although Pascal made the discovery, the accident occurred in a man named Joseph Bram, who first made hydraulics available in the Screw Oil Press Machine he made in 1795. The liquid used as preface in this Screw Oil Press Machine is water.
1. The Screw Oil Press Machine must be operated by the person, before driving the pump, the hydraulic motor's pipeline, control valve, the pressure gauge is normal, the confirmation is correct, the square can operate.
2. In the disassembly of the mold should be cut off the power. The replacement of the pressure head, should be installed on the mold, after the die, the hole is strictly prohibited to reach the hand.
3. The operator shall comply with the requirements of the working pressure allowable scope of the Screw Oil Press Machine and shall not work under overpressure or low pressure conditions.
4. In suppressing or correcting the workpiece, do not use the hand to live the workpiece, do not use irregular temporary mat iron or round steel as a pressure pad correction.
5. All kinds of horn to be checked. The use of brittle hard mat iron is prohibited. The horn should be placed in the middle, do not skew, in case of a pop-up injury.
6. Hanging objects must be flat, cushion stability, not stacked too high, not stacked on the channel.
7. All kinds of slings and rigging must be regularly checked and used within the prescribed load range.
8. After work or stop, the upper pressure head should be lowered and the power supply should be cut off to ensure safety.
9. After the Screw Oil Press Machine is actuated, the person is not allowed to rely on the hydraulic machine, also does not stand under the beam.
