VIC Machinery summarizes the 4 reasons for the oil press and the corresponding solutions.
Causes | Solution |
New screw oil press machine is pressed for the first time , the pressing screw is not heated and polished, and a large amount of material is fed into the pressing chamber in a short time. | Correct operation and running-in, pay attention to the sound and current of the screw oil press machine, slowly feed materials to increase the capacity, and stop the oil expeller in time if there is an abnormality |
The oil cake is too thin and the pressure of the pressing chamber increases | Reverse the adjusting nut to increase the thickness of the cake |
The oil cake is too dry when running in | Increase feed moisture |
Pressing the oil material with shell, the shell content is too high or the hard material is mixed into the oil and enters the pressing chamber | Stop the oil pressers to disassemble the upper pressing cage and loosen the round ring. Pull out the press shaft and clean the press chamber. |
